Appendix

ITW Fastex® Plastic Fastener Manufacturer

ADHESIVE FOAM TAPE SPECIFICATIONS,
APPLICATION TECHNIQUES AND GENERAL GUIDELINES

PHYSICAL PROPERTIES

Adhesive Type:

Rubber-based pressure sensitive foam tape
Clip Material:

Nylon 66
Operating Temperature Range:

Continuous -0°F(-18.0°C) to 120°F(49°C)
Peel Adhesion:
(Adhesive Only)
(PSTC-1) 180 (5 min. Dwell, 12 inches per min.)
30 min.
24 hrs.
168 hrs.

100 + oz./in. width
100 + oz./in. width
100 + oz./in. width
Shear Adhesion:
Adhesive Only)
(PSTC-7)
72°F at 50% R.H. 100 + hours
72°F with intermittent aqueous wetting 100 + hours

UL Information: All cord clip part numbers listed in the catalog with the following symbol
are recognized under UL Wire Positioning
Devices. UL File NO. 353159

APPLICATION TECHNIQUES
  1. The recommended cord clip tape surface application temperature range
    is 70°F (21°C) to 100°F (38° C).
  2. When applying cord clip tape to the substrate surface, it is important that a sufficient amount of pressure is applied to assure optimum adhesion. Avoid adhesive contamination with foreign material.
  3. To obtain maximum adhesion, the substrate surface must be clean, dry, free of grease and oil and well unified. Clean surfaces with low strength solvents, isopropyl alcohol or haptene.
  4. The recommended set-up time of the cord clip tape to substrate surface is 30 minutes.
GENERAL INFORMATION
The cord clip tape is resistant to water, detergent and alcohol. This tape is not recommended for use in contact with aliphatic or aromatic hydrocarbons.

Recommended Storage

Guidelines: Optimal:
Temperature Ranges:
Humidity:

72°F (22°C) at 50% R.H.
40°F (4°C) to 75°F (24°C)
40 to 60%
Shelf Life: One Year if stored at recommended storage guidelines.

Bonding Surface      
Guidelines: Polystyrene Painted Surfaces Glass
  Polycarbonates Rigid Vinyl Steel
  ABS Rubber Nylon
  Aluminum Acrylics  

User should evaluate product suitability for a specific application under actual use conditions.

Note: All statements, technical information and recommendation herein are believed to be reliable. ITW assumes no responsibility for end use applications, and no performance warranty is expressed or implied.



Appendix

ITW Fastex®
ITW Fastex® - U.S.
195 Algonquin Road,
Des Plaines, IL 60016
Phone: 847-299-2222
Fax: 847-390-8727
ITW Fastex® - Asia
A4, No.3-2 K.E.P.Z.
Kaohsiung, Taiwan R.O.C.
Phone: 886-7-811-9206-10
Fax: 886-7-811-1795 / 811-0332
sales@itweba.com

Home | Product Catalog | New Products | Sitemap | Contact Us

Panel Fasteners & Plastic Clips | Rivets | Access Panel Fasteners | Bumpers - Snap-In
Wire Management Clips, Purse Locks, & Straps | Plastic Leveling Feet | Grommets | Electronics Fasteners, Supports, & Spacers
Capabilities | Cabinet Products | Furniture Solutions | Electronic Fastening Solutions & PC Applications
ISO & AS9100 Registration | RoHS | Appendix | Privacy Statement | Disclaimer


This site created and maintained by American Web Page, L.L.C. (www.awpg.com).
Copyright© 2002 - 2010 American Web Page, L.L.C. All Rights Reserved.